Mold Damage Restoration In Colorado Springs Will Retun A Building To Its Original Condition

by | Dec 19, 2017 | Damage Restoration

After a fire, flood or water leak in a building, mold can develop within 48 to 72 hours. Mold can cause health problems when it’s trapped in a building and cause structural damage. Foundations and buildings that no longer have a proper seal to keep the moisture out can result in mold growth behind walls and other areas of the building. Mold damage restoration in Colorado Springs can eliminate this problem and improve the indoor air quality and structural integrity of a structure. A mold restoration service provides 24-hour service because they understand the importance of correcting this type of situation as soon as possible.

Will Bleach Help To Remove Mold?

Bleach is a great way to white clothes and disinfect items, but it won’t solve a serious mold problem. The mold has to be properly cleaned and disinfected with mold-killing products and proper removal methods. An area that has been cleaned with bleach might smell cleaner, but the mold will return.

How Can An Owner Reduce Mold In A Building?

Keeping the humidity levels below 50% in a structure will reduce the chance of mold development. Proper air ventilation throughout a building is another key element to prohibit mold growth. Leaks in a roof, wall, or plumbing system should be repaired immediately when they are detected.

The Hidden Danger

Mold is considered a hidden danger because it can grow on any organic surface. A small water leak from a toilet can cause mold development behind a wall, under the floor tile, carpet padding, and other locations an owner can’t see. Leaking roofs can cause mold to develop in the insulation in an attic or on the roof supports.

How Is Mold Restoration Performed?

Mold Damage Restoration in Colorado Springs begins by eliminating the source of the leak. Trained technicians will begin removing using large dehumidifiers and fans to increase the air circulation in the area of the mold. They will close off the area so mold spores don’t travel to other parts of the structure, remove items that are saturated with water, begin cleaning and disinfecting the area and return it to its regular condition.

Mold can be very dangerous to everyone and should be removed by an experienced mold removal and restoration company. Check out Sitename for more information about mold, fire, and water restoration services.

Latest Articles

Categories

Archives